Hi guys,here i am posting about how to root samsung galaxy s3 I9300 Jelly Bean based on XXUFME3 firmware.
Requirements:
1]USB drivers for Samsung galaxy s3 I9300 to transfer files from device to computer Download
2]Download Root Package for Samsung Galaxy S3(CF-Root-SGS3-v6.4.zip) Download
3]Download Odin v1.85 for samsung galaxy s3 firmware Download
Procedure:
1]Download and extract all the above files to the computer.
2]Make sure that the your phone is based on the XXUFME3 firmware.
3] Take backup of your phone data for safety.
4]Charging of phone should be above 80%.
5]Now switch of the samsung galaxy s3 and enters into the download mode by pressing and holding Volume down button and menu button together and then press power button until triangle is appear.Again press power button to continue.
6]Launch Odin on computer (Run as Administrator)
7]Now connect device to the computer by using USB cable.
8]Wait till Odin shows ID: COM box turn to yellow and showing computer port number.This means connection is successfully established.
9]Then in Odin select PDA button and select the file CF-Root-SGS3-v6.4.zip
10]Confirm that the Auto-Reboot and F.Reset Time Check-boxes are selected .And do not select Re-Partition check box .
11]Now click on the start button in Odin to start installation or rooting.It may take some minutes.
12]After installation complted,phone will be restart automatically and then disconnect the USB from the computer.
13]Now Enjoy,you have have successfully rooted.
Disclaimer:
Author Is Not Responsible For Any Kind of Damage To Your Phone And Illegal Use By Users.
Regards,
Droid4ever.com
No comments:
Post a Comment
Do not spam here....